1、Introduce
Shoe soles silicone rubber is white liquid two compound condensation silicone rubber.part A is silicone rubber, part B is the catalyst.Ratio:100:2-100:4.with good flowability and tear strength, so the silicone mold won’t be out of shape.it is ideal silicone material to make shoe soles molds.
2、Characteristical
①With low viscosity, good flowability and tear strength, the silicone molds won’t be out of shape.
②With High resistance to high temperature,acid-Bases and aging, so can be used for a long time.
③With low linear shrinkage.
④It is an environmental liquid silicone product, not easy to combustion, also won’t catch fire.
3、Application
Suitable for making molding for shoe soles, sand, gypsum and other simple pattern products.
4、Technical data
Item no. | color | Hardness shore Ao | Viscosity (Mpa.s) | Tear strength(KN/m) | Tensile strength(Mpa) | Elongation break(%) | Shrinkage(%) |
15 | white | 15±2 | 15000±1000 | 20±2 | ≥2.5 | 400 | ≤0.3 |
25 | white | 25±2 | 20000±1000 | 24±2 | ≥3.0 | 280 | ≤0.3 |
5、how to make molds
The way of making molds: have two ways to make molds, pouring and brushing.
Because Pouring molds need a large quantity of silicone rubber, can use cheap silicone rubber that the quality is not good. the hardness of silicone is about 30-40 shore A just ok.
But Brushing molds should use good quality and fast curing silicone rubber. Hardness about 20-25 shore A, ratio about 2%-5%, pot lifetime about 10 mins. Don’t forget to make gypsum molds outside of silicone molds.
④Pour the mixture into the model frame, heating to 60℃ for about 2-3 hours, after cooling and cured then take out it, and if heating to 120℃ then only need about 10 min then finish.
6、FAQ
Food grade silicone rubber is a high transparent, dull platinum cure silicone rubber, it thought the inspect inspection and sterilization and got the FDA certificate, you can eat mix with food or medical product without any side effects.
Food-grade silicone resin is composed of silicate polycondensation of inorganic polymer gel materials. The main composition is SiO2 · nH2O, and content is above 98%,avirulent insipidity, stable chemical properties, If the silicone products have a peculiar smell that is not recommended for use, it is possible that resin or the PP material don’t cure the cause.
In general, shoe soles silicone rubber without high quality, because don’t need many steel molds of same shoe soles. So silicone molds with 3-5 duplication times are ok.
operating process
Fix the products or shoe soles molds on the plane board by glue, then make a frame for it to prevent the silicone outflow from the gap. Next, pour the silicone rubber on the products or shoe soles mold after stirring and mixing the silicone rubber and catalyst according to the ratio:100:2. finally, pouring the gypsum water into silicone molds after the silicone mold has been cured. the video of how to make molds by shoe soles silicone rubber is as follows:
7、Note
1. Please add the catalyst according to temperature. can decrease the quantity at high temperatures. also please note that the silicone molds will become harder and brittle if add too many catalysts. but the pot life will be longer than before if add less catalyst.
2. Suggest don’t add silicone oil, to prevent the property changes of silicone molds.
3. Please use the silicone molds after 24hrs.
Comments
Post a Comment