Currently the production of artificial culture stone steps mainly in ten steps, namely: model sculpture model processing → Templates → production → Templates → Partition → model paste brushing silicone mold release preparations → first layer of silicone brush silicone perfusion → off mode. According to the above ten steps, we can see that the production of artificial culture stone mold is the most important use of templates.
Artificial culture stone silicone
Culture stone generally use a silicone mold, the first use of ocher color modulation, culture stone, culture brick color palette depending on the circumstances, the color of soil is basically a dozen colors, different colors can be mixed to achieve the color you need, color is a key issue, the color is not uniform culture stone, generally do so, first bring up the light brown, and then bring up the gray, light gray in the recall, these three different colors sprayed internal mold, not the whole entire spray again, put the mold into several different areas, spray it in several colors, and finally, the cement poured into the mold, you can, of course, not all of these three colors, colors can be freedom of modulation, the key is no longer before you put the color poured cement is injected into the mold, each color must use a separate gun, there is a different color to spray in different regions so that the color does not make a single, and there is a natural excessive.
Artificial culture stone color is not the main reason there are the following aspects
1, pigments: color deviation is too large, generally speaking, artificial stone culture and background color of complexion in two parts, looking sure to use good quality paint, and so it is not necessary to consider the background. And looking at each color has a different pigment model, once the fixed exchange should not be casually used models of color.
2, Cement: Some people in order to reduce costs, use black cement to produce artificial culture stone, which is bad because efflorescence easily whitened black high alkali content of cement, in addition to the black color of cement because of its own so it is difficult to recall in line with the template colors.
3, the mold: some plants in order to reduce the cost of using a resin mold, and resin molds itself is not have easy coloring characteristics, which affect the color of the coloring, it is recommended that you use a silicone rubber mold to produce artificial culture stone, although the cost may be the higher point, made out of lifelike, pure color does not blur. Furthermore, mold is not much higher than the overall cost of their culture stone than silicone rubber resin mold.
In order to better artificial culture stone color after using silicone molds when copying artificial culture stone, such as mold release the best care for more than 24 hours to go into production, and follow the principles of artificial culture stone mold always separated from the tray, so not only can greatly extend the life of artificial culture stone mold but also good for color issues; Another way is to go into production in artificial culture stone front, it is recommended to do liposuction treatment, although this took a look at a multi-step in fact Misfortune power cut timber after liposuction is generally treated mold color will be more pure, bright.
Comments
Post a Comment